Eshop roka 2025 s vykurovacou technikou

Eckiger Kugelhahn - mit Filter - 1/2"x3/8"; ohne Mutter IVAR.ART.224

Artikelnummer: ART.224
Nicht bewertet Bewertungsdetails
16,61 € –19 %
Vykurovacia technika Rohový guľový uzáver - s filtrom - 1/2"x3/8"; bez matice
16,61 € –19 % 13,29 € / St 10,80 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager beim Lieferanten

Detaillierte Informationen

Produktdetailbeschreibung

Eckiger Kugelhahn , IVAR.ART.224, Abmessung: 1/2" x 3/8", Verpackung: 10 Stk. in Beutel / 100 Stk. in Karton
 
  • PN 10, T = +90 °C
  • mit Filter
  • ohne Mutter
  • Material: Chromverzinkter Messing CW617N

Häufig gestellte Fragen

  • Wie wähle ich die richtige Art und Größe der Armatur/Ventil aus? Orientieren Sie sich am Nenndruck (PN) und der Betriebstemperatur (T), die in den technischen Parametern angegeben sind – diese müssen den tatsächlichen Betriebsbedingungen Ihres Systems entsprechen oder diese übertreffen, und die Anschlussgröße muss dem Rohrdurchmesser entsprechen.
  • Wie funktioniert diese Armatur/Ventil? Der genaue Funktionsmechanismus (Dichtung, Druckregelung, Rücklaufverhinderung usw.) hängt vom konkreten Typ ab – eine detaillierte Beschreibung der Funktion finden Sie oben bei diesem Produkt.
  • Muss die Montage von einem Fachmann durchgeführt werden? Bei einfacheren Schließarmaturen kann die Montage auch vom Heimwerker durchgeführt werden, bei Regel- und Sicherheitsarmaturen (Sicherheitsventile, Druckminderer) empfehlen wir stets einen Fachmann, da es sich hierbei um Sicherheitsbauteile handelt.

Zusätzliche Parameter

Kategorie: Sanitärarmaturen
Garantie: 2 Jahre
Gewicht: 0.136 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:12:20

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

S Avatar des Autors 01.11.2026 19:49
Hej, jag förstår inte riktigt vad de där siffrorna 1/2" och 3/8" betyder. Jag har ett gammalt element och en liten rör som ska kopplas ihop, hur vet jag om den här ventilen passar utan att behöva skruva isär allt?
A Avatar des Autors 01.11.2026 19:49
Hej Sebastian! De där måtten är bara storleken på anslutningarna - 1/2" är den större sidan och 3/8" den mindre, så ventilen är tänkt att koppla ihop just två olika grova rör eller anslutningar. Enklast är att titta på eller mäta de gängor du redan har (eller på det gamla elementet/ventilen som sitter där idag) och jämföra med dessa mått, gärna med hjälp av en rörmokare om du är osäker. Tänk också på att den klarar tryck upp till PN 10 och temperatur upp till 90°C, vilket räcker gott för ett vanligt element.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.