Eshop roka 2025 s vykurovacou technikou

Flexibelles Schlauchgewebe Edelstahl - 2"FF (50x65); 50cm IVAR.2512

Artikelnummer: 25126050
Nicht bewertet Bewertungsdetails
121,28 € –20 %
Vykurovacia technika Flexi hadica opletenie nerez  - 2"FF (50x65); 50cm
121,28 € –20 % 97,02 € / St 78,88 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager beim Lieferanten

Detaillierte Informationen

Produktdetailbeschreibung

Flexi Schlauch mit Edelstahlgeflecht, IVAR.2512, Maße: 2" FF (50 x 65), Länge: 50 cm 
 

 

Hinweis: 
Die Längen 30 und 70 cm auf Bestellung. Die Werte in Klammern beziehen sich auf den inneren und äußeren Schlauchdurchmesser in mm.

 

Häufig gestellte Fragen

  • Wie wählen Sie den richtigen Typ und die richtige Größe der Armatur/Ventil aus? Orientieren Sie sich an dem angegebenen Nenndruck (PN) und der Betriebstemperatur (T) in den technischen Parametern – diese müssen den tatsächlichen Betriebsbedingungen Ihres Systems entsprechen oder diese übertreffen, und die Anschlussgröße muss mit dem Rohrdurchmesser übereinstimmen.
  • Wie funktioniert diese Armatur/Ventil? Der genaue Funktionsmechanismus (Dichtung, Druckregelung, Rücklaufverhinderung usw.) hängt vom konkreten Typ ab – eine detaillierte Beschreibung der Funktion finden Sie weiter oben bei diesem Produkt.
  • Muss die Montage von einem Fachmann durchgeführt werden? Bei einfacheren Schließarmaturen kann der Heimwerker die Montage selbst übernehmen, bei Regel- und Sicherheitsarmaturen (Sicherheitsventile, Druckminderer) empfehlen wir immer einen Fachmann, da es sich hierbei um Sicherheitsbauteile handelt.

Zusätzliche Parameter

Kategorie: Innengewinde - Innengewinde
Garantie: 2 Jahre
Gewicht: 1.93 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:09:08

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

A Avatar des Autors 01.11.2026 22:52
Ciao, devo collegare un bollitore con attacchi da 2" femmina: questo flessibile da 50 cm regge una pressione di esercizio di 8 bar e temperature dell'acqua intorno ai 70°C senza problemi?
A Avatar des Autors 01.11.2026 22:52
Ciao Alberto, questo flessibile ha una PN 6, quindi la pressione massima di esercizio è 6 bar, non 8 - su questo punto ti consigliamo di verificare bene l'impianto prima di montarlo. La temperatura invece non è un problema, perché regge fino a 110°C. Le dimensioni sono 2" FF con diametro interno/esterno 50x65 mm, lunghezza 50 cm.
J Avatar des Autors 30.10.2026 08:34
Tisztelt Címzett!
A Avatar des Autors 30.10.2026 08:34
Tisztelt Jakab Úr! A Flexi tömlő rozsdamentes fonattal - 2"FF (50x65); 50cm termék a beszállító raktárában van, így Budapestre a szállítás kb. 3–7 nap. Az ára 35 504 Ft/db bruttó, tehát 2 db esetén 71 008 Ft bruttó. A szállítási költség a rendelés során a kosárban jelenik meg, a megrendelés véglegesítése előtt. A termék itt található: https://www.atria.hu/flexi-tomlo-rozsdamentes-fonattal-2-ff-50x65-50cm/

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.