Eshop roka 2025 s vykurovacou technikou

Gewinde-Rückschlagventil (Kugel) - Serie 07 - 6/4"; L=138 mm BRA.T7.100

Artikelnummer: T7100040
Nicht bewertet Bewertungsdetails
117,71 € –20 %
Vykurovacia technika Závitová spätná klapka (gulôčka)- séria 07 - 6/4"; L=138mm
117,71 € –20 % 94,17 € / St 76,56 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager beim Lieferanten

Detaillierte Informationen

Produktdetailbeschreibung

Flansch-Rückschlagventil (Kugel), BRA.T7.100, Maß: 6/4", Länge: 138 mm

 

  • max. Druck 16 bar, Gewinde 1“ bis 3“ F/F gemäß ISO 228-1
  • T = -10°C bis max. +70 °C
  • für Abwasser, dichte und viskose Flüssigkeiten, landwirtschaftliche Anwendungen
  • Material – Gehäuse, Deckel: Guss GJS 400-15, Kugel: Stahl mit NBR-Beschichtung
  • min. Druck 0,2 bar
  • min. Gegendruck 0,5 bar
  • nicht geeignet für Dampf und Gase

Häufig gestellte Fragen

  • Wie wähle ich die richtige Art und Größe der Armatur/Ventil? Orientieren Sie sich am Nenndruck (PN) und der Betriebstemperatur (T), die in den technischen Parametern angegeben sind – diese müssen den tatsächlichen Betriebsbedingungen Ihres Systems entsprechen oder diese übertreffen, und die Maße der Anschlussverbindungen müssen mit dem Rohrdurchmesser übereinstimmen.
  • Wie funktioniert diese Armatur/Ventil? Der genaue Funktionsmechanismus (Dichtung, Druckregelung, Rücklaufverhinderung usw.) hängt vom konkreten Typ ab – eine detaillierte Beschreibung der Funktion finden Sie weiter oben bei diesem Produkt.
  • Muss die Montage von einem Fachmann durchgeführt werden? Bei einfacheren Schließarmaturen kann die Montage auch vom Heimwerker durchgeführt werden, bei Regel- und Sicherheitsarmaturen (Sicherheitsventile, Druckminderer) empfehlen wir immer einen Fachmann, da es sich hierbei um Bauteile mit Sicherheitsfunktion handelt.

Zusätzliche Parameter

Kategorie: BRA.T7.100 - Gewinde-Rückschlagventile (Kugel)
Garantie: 2 Jahre
Gewicht: 2.096 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:06:13

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

L Avatar des Autors 19.11.2026 18:40
Bonjour à vous, j'ai un système d'évacuation pour eaux usées agricoles qui peut monter à 50°C, est-ce que ce clapet tient le coup niveau température et pression inverse pour éviter les retours dans la fosse ?
A Avatar des Autors 19.11.2026 18:40
Bonjour Léo, oui aucun souci, ce clapet supporte de -10°C à +70°C donc vos 50°C passent largement. Pour la fermeture, il faut juste une pression inverse minimale de 0,5 bar pour que la bille se plaque bien et bloque le retour. Le corps est en fonte GJS 400-15 avec bille revêtue NBR, donc bien adapté aux eaux usées et liquides agricoles.
S Avatar des Autors 21.10.2026 16:18
Mám v systéme pre odpadovú vodu tlak 15 bar a teplotu 60 stupňov, táto klapka 6/4" to zvládne? A dá sa použiť aj na viskózne kvapaliny?
A Avatar des Autors 21.10.2026 16:18
Áno, tento model vydrží až 16 bar a teploty do 70 °C, takže vaše podmienky sú v poriadku. Na husté a viskózne kvapaliny je tiež určená, ale pozor, nie je vhodná na paru ani plyny. Ak hľadáte riešenie pre iný rozmer, pozrite si našu celú kategóriu závitových spätných klapek.
R Avatar des Autors 08.09.2026 17:17
Mám čerpadlovú skupinu so závitom 6/4" a potrebujem zabrániť spätnému toku vody v systéme. Hodí sa táto klapka priamo za čerpadlo, alebo je to skôr určené niekde inde v sústave?
A Avatar des Autors 08.09.2026 17:17
Áno, táto klapka sa používa bežne práve za čerpadlom – na to je určená. Dĺžka 138 mm je dôležitá pri plánovaní miesta montáže, aby sa vám všetko zmestilo. Závit 6/4" priamo pasuje na štandardné pripojenie, takže by ste nemali mať problém s osadením.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.