Eshop roka 2025 s vykurovacou technikou

Heizkreisverteiler-Set - ohne Gehäuse - 1"x EK; 2-Wege; Messing IVAR.CS 553 DRS

Artikelnummer: 553770BS
Nicht bewertet Bewertungsdetails
327,18 € –20 %
Vykurovacia technika Zostava rozdeľovač/zberač - bez skrine - 1"xEK; 2cestný; mosadz
327,18 € –20 % 261,74 € / St 212,80 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager beim Lieferanten

Detaillierte Informationen

Produktdetailbeschreibung

Zusammensetzung Verteiler IVAR.CS 553 DRS, Maße: 1" x EK, 2-Wege

 

  • PN 10, T = +120 °C
  • Enthält: Verteiler mit Regelarmaturen, Sammler mit Absperrelementen, Befestigungskonsolen, 2 Stück Kugelhähne mit Handrad, 2 Stück Endstücke mit automatischem Entlüftungsventil und Drehentleerungsventil
  • Material: Messing CW617N

 

Zusammensetzung für Heizkörperheizung oder Sanitärinstallation ohne Pumpe mit Regelventilen ausgestattet.

Empfohlen für die Temperaturdifferenz der Heizkörperteilung des Systems +75 ˚C / +65 ˚C

Ausgestattete Umwälzpumpe: ohne Pumpe (nicht erforderlich, da die Pumpe durch die Brennwerttechnik ersetzt wird)
 
Zur Vereinfachung der Einstellung der Regelparameter der Fußbodenheizung empfehlen wir, die Zusammensetzung mit Thermometern und Durchflussmessern auszustatten.
 
 
Hinweis: Der Verkäufer haftet nicht für Funktionsstörungen, die durch Verschmutzungen im System verursacht werden.
 
Vor jedem Inbetriebnahme der Heizungsanlage, insbesondere bei Kombination aus Fußboden- und Heizkörperheizung, weisen wir ausdrücklich auf die gründliche Spülung des gesamten Systems gemäß den Herstellerhinweisen hin.
Wir empfehlen die Behandlung der Heizungsanlage mit dem Präparat GEL.LONG LIFE 100. 
 
Verteiler sind in Schränken unterzubringen. Empfohlene Längen sind in der Verteiler-Tabelle angegeben. Die Montage der Verteiler an der höchsten Stelle ist praktisch eine Voraussetzung (auf horizontale Höhenunterschiede im Grundriss achten). Eine Ausnahme bildet die Entlüftung kleiner Fußbodenheizungen in höheren Stockwerken über den Badezimmerheizkörper. Falls das Fußbodensystem ausschließlich in Bädern ausgeführt wird, kann das Rohr der Rücklaufleitung des Heizkörpersystems mit Polyethylenmantel verwendet werden oder alternativ kann am Ende dieser Parallelschleife direkt ein Temperaturregler eingesetzt werden, der eine Abkühlung auf eine niedrige Temperaturniveau gewährleistet (Achtung! Es ist notwendig, diesen thermisch von der Rücklaufleitung des Heizkörperkreises abzutrennen, um eine thermische Beeinflussung zu vermeiden). 
 
Für weitere Informationen können Sie zu den Fragen und Antworten auf https://www.systemova-doska.sk/podlahove-Heizung/ wechseln

Zusätzliche Parameter

Kategorie: IVAR.CS 553 DRS - Heizkreisverteiler/Heizkreissammler mit Schrank
Garantie: 2 Jahre
Gewicht: 4.097 kg
EAN: 8595145903511
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:04:54

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

C Avatar des Autors 10.11.2026 08:21
Buongiorno, sto valutando l'installazione di questo collettore IVAR.CS 553 DRS su un impianto misto radiatori e riscaldamento a pavimento: vorrei sapere se è necessario prevedere un circolatore dedicato per il collettore oppure se questo set è concepito per funzionare senza pompa propria. Inoltre, essendo le vie regolate manualmente tramite le valvole, è sufficiente l'installazione di termometri e misuratori di portata separati per la taratura, oppure questi sono già inclusi nel set?
A Avatar des Autors 10.11.2026 08:21
Buongiorno Claudio, il set CS 553 DRS è pensato proprio per funzionare senza circolatore dedicato, perché la pompa viene sostituita da quella del generatore di calore. Per quanto riguarda la taratura, i termometri e i misuratori di portata non sono inclusi nel set: le consigliamo di acquistarli a parte come accessorio, così da facilitare l'impostazione dei parametri soprattutto se in abbinamento a riscaldamento a pavimento. Il set comunque comprende già collettore con valvole di regolazione, collettore di ritorno con valvole di chiusura, staffe di fissaggio, valvole a sfera e terminali con sfiato automatico e scarico.
A Avatar des Autors 22.10.2026 15:50
Je veux savoir si cet ensemble en laiton CW617N convient pour une installation avec radiateurs où la température de départ est de +75 °C, et s'il est livré sans boîtier comme l'indique le titre.
A Avatar des Autors 22.10.2026 15:50
Oui, ce modèle IVAR CS 553 DRS est parfaitement adapté à votre configuration car il est conçu pour des dénivelés allant jusqu'à +75 °C / +65 °C avec du laiton CW617N. Comme précisé dans la description, vous recevez bien l'ensemble collecteur sans armoire ni boîtier, uniquement les pièces détachées et les consoles de fixation nécessaires. N'oubliez pas de bien rincer le système avant la mise en service pour éviter tout problème de fonctionnement dû aux impuretés.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.