Eshop roka 2025 s vykurovacou technikou

Kolbenmuffe 3/4"FxEK; Nickel IVAR.RR 4712 N

Artikelnummer: 500196
Nicht bewertet Bewertungsdetails
9 € –20 %
Vykurovacia technika Koleno - 3/4"FxEK; nikl
9 € –20 % 7,20 € / St 5,85 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager (17 St)

Detaillierte Informationen

Produktdetailbeschreibung

Elbow, IVAR.RR 4712 N, Maß: 3/4" F x EK, Verpackung: 25 in Beutel / 200 in Karton 

 

  • PN 10, T = +120 °C
  • IVAR.RR 4712 N - Gewinde innen F - Eurokegel (EK)
  • Material nickelverzinkter Messing CW617N

Häufig gestellte Fragen

  • Wie wähle ich die richtige Größe des Fittings aus? Der Gewinde- Durchmesser muss exakt dem Gewinde auf der Rohrleitung oder Armatur entsprechen, an die der Fitting angeschlossen wird – die Abkürzung FF (innen-innen) und MF (außen-innen) im Namen zeigen den Gewindetyp auf jeder Seite an.
  • Ist Dichtungsmaterial bei der Montage erforderlich? Ja, bei Schraubverbindungen wird standardmäßig Teflonband oder Hanf mit Dichtmasse verwendet, um eine perfekte Dichtheit der Verbindung zu gewährleisten.
  • Muss die Montage von einem Fachmann durchgeführt werden? Eine einfache Schraubverbindung kann bei grundlegender Geschicklichkeit auch vom Heimwerker durchgeführt werden. Bei Eingriffen in einen bereits funktionierenden Leitungsanschluss (insbesondere Gas) empfehlen wir, einen Installateur hinzuzuziehen, der gleichzeitig die Dichtheit der Verbindung prüft.

Zusätzliche Parameter

Kategorie: Winkel EK
Garantie: 2 Jahre
Gewicht: 0.103 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:05:13

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

D Avatar des Autors 18.11.2026 13:03
Ho un tubo con quella testa tonda che si stringe con il dado, non il filetto normale, posso usare questo gomito o devo prendere un altro tipo? E poi devo mettere qualcosa sopra la filettatura per non far perdere acqua?
A Avatar des Autors 18.11.2026 13:03
Sì, questo gomito va bene per lei: da un lato ha il filetto interno da 3/4" e dall'altro l'attacco Eurocono (EK), cioè proprio quello con il dado che stringe, quindi è pensato apposta per quel tipo di collegamento. Per la tenuta sulla parte filettata basta usare il classico nastro in teflon oppure canapa con pasta sigillante, così evita perdite. È in ottone cromato e regge fino a 120°C, quindi va bene anche per impianti di riscaldamento.
Y Avatar des Autors 14.10.2026 11:04
Bonjour, je voudrais savoir si ce coude en laiton nickelé peut se visser directement sur un tuyau standard et si je dois mettre du ruban téflon pour que ça ne fuit pas ?
A Avatar des Autors 14.10.2026 11:04
Bonjour, oui ce raccord de 3/4" FxEK est bien conçu pour être vissé sur un filetage correspondant. Comme il s'agit d'un raccord fileté, nous vous recommandons d'utiliser du ruban téflon ou du chanvre avec une pâte pour assurer l'étanchéité. Pour toute installation complexe, pensez à consulter un professionnel.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.