Eshop roka 2025 s vykurovacou technikou

Kupferheizrohr für IVAR.TANKS - DN 100 (DN 180); 550 mm; Wärmetauscher 1,21 m² IVAR.SR1A

Artikelnummer: 4000617
Nicht bewertet Bewertungsdetails
687,57 € –20 %
Vykurovacia technika medená vyhrievacia vložka pre zásobníky IVAR.TANKS  - DN 100 (DN 180); 550mm; výmenník 1,21m2
687,57 € –20 % 550,06 € / St 447,20 € ohne MwSt. Grundpreis:
Internationale Zustellung
Auf Bestellung (1-2 Wochen)

Detaillierte Informationen

Produktdetailbeschreibung

Heizrohreinsatz für Speicher IVAR.TANKS, IVAR.SR 1A, Abmessung: 3/4", DN 100

 

  • Heizrohreinsatz aus verzinktem kupfernen laminierten Rohr ist zur Warmwasserbereitung bestimmt
  • Heizrohreinsatz wird vormontiert mit geperforierter Flanschplatte Ø 180 mm, Flanschdeckel, Muttern und Schrauben geliefert
  • Wärmeübertragungsfläche 1,21 m2
  • Länge 550 mm
  • Leistung 36 kW

Häufig gestellte Fragen

  • Wie kann ich sichergehen, dass dieses Produkt für mein System geeignet ist? Vergleichen Sie die Abmessungen, Materialien und technischen Parameter, die in der Beschreibung angegeben sind, mit den Anforderungen Ihres konkreten Systems. Bei Unklarheiten kontaktieren Sie uns mit einer genauen Beschreibung Ihres Anschlusses.
  • Muss die Montage von einem Fachmann durchgeführt werden? Bei einfacheren Arbeiten kann die Montage auch von einem geschickten Heimwerker durchgeführt werden. Bei Arbeiten an Gas-, elektrischen oder Druckleitungen empfehlen wir immer einen Fachtechniker.

Zusätzliche Parameter

Kategorie: Heizungseinsätze für Pufferspeicher
Garantie: 2 Jahre
Gewicht: 6.9 kg
Art: Konsole / Sonstiges
Dĺžka: 550 mm
Leistung: 36 kW
Letzte Preisaktualisierung: 13.04.2026 1:00:12

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

J Avatar des Autors 01.11.2026 14:25
Mám zásobník s přírubou DN 180, je tahle vložka dodávaná i s tím víkem příruby a šrouby, nebo si to musím dokupovat zvlášť? A stačí výkon 36 kW na běžný rodinný dům?
A Avatar des Autors 01.11.2026 14:25
Vložka se dodává kompletně smontovaná i s perforovanou přírubou Ø 180 mm, víkem příruby, maticemi a šrouby, takže nic dalšího kupovat nemusíte. Výkon 36 kW při ploše výměníku 1,21 m2 pokryje přípravu teplé vody pro běžný rodinný dům bez problémů. Pokud řešíte konkrétní zapojení, napište nám parametry vašeho systému, ať máte jistotu, že vám rozměr DN 100 sedí.
M Avatar des Autors 15.10.2026 19:17
Ich soll für den IVAR.TANK helfen, der hat eine Öffnung von 180 mm. Passt das hier mit dem DN 100 und der 550 mm Länge genau rein oder ist das zu klein?
A Avatar des Autors 15.10.2026 19:17
Ja, das passt perfekt, denn dieser Einsatz wird mit einer geperforierten Flanschplatte im Ø 180 mm geliefert und ist für Speicher wie den IVAR.TANK gemacht. Die Wärmeübertragungsfläche beträgt dabei 1,21 m² bei einer Leistung von 36 kW. Wenn du noch andere Heizrohreinsätze suchst, schau dir einfach die Kategorie Heizungseinsätze für Pufferspeicher an.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.