Eshop roka 2025 s vykurovacou technikou

Zwischenflansch-Absperrklappe WAFER J9 IVAR BRA.J9.100 mit pneumatischem Antrieb AP 40, doppeltwirkend – DN 32 – AKTION

Artikelnummer: J9.100.032D16
Akcia
Nicht bewertet Bewertungsdetails
393,60 € –10 %
Medziprírubová klapka WAFER J9 IVAR BRA.J9.100 s pneumatickým pohonom AP 40, dvojčinný – DN 32 – AKCIA
393,60 € –10 % 354,24 € / St 288 € ohne MwSt. Grundpreis:
Internationale Zustellung
Auf Bestellung (1-2 Wochen)

Detaillierte Informationen

Produktdetailbeschreibung

Einsatz

Das Set dient dem automatischen Öffnen und Schließen einer Rohrleitung mit Druckluft. Es verbindet die Zwischenflanschklappe DN 32 mit dem pneumatischen Antrieb AP 40, der im EIN/AUS-Betrieb arbeitet.

Eigenschaften

  • Klappe BRA.J9.100: Gehäuse aus Gusseisen, Scheibe aus vernickeltem Gusseisen, EPDM-Dichtung, O-Ring FKM
  • max. Betriebsdruck PN 16, Temperatur -10 bis +120 °C
  • pneumatischer Antrieb AP 40, doppeltwirkend – Ansteuerung EIN / AUS
  • Zwischenflanschmontage (WAFER) zwischen den Rohrflanschen

Montage und Betrieb

Montage, Druckluftanschluss und Inbetriebnahme sollte ein Fachbetrieb übernehmen. Einzelheiten zum Set stehen im Datenblatt, die Datenblätter von Klappe und Antrieb werden separat geführt.

Technische Daten

ArtikelnummerJ9.100.032D16
HerstellerIVAR
TypBRA.J9.100 + AP
NennweiteDN 32
AntriebAP 40
Antriebsfunktiondoppeltwirkend
Max. DruckPN 16
Temperaturbereich-10 °C … +120 °C
GehäusematerialGusseisen
Klappenscheibevernickeltes Gusseisen
DichtungEPDM; O-Ring FKM
AnsteuerungON / OFF

Häufige Fragen

Worin unterscheiden sich doppelt- und einfachwirkender Antrieb im Set?
Der einfachwirkende Antrieb (Kennzeichen S) hat Schließfedern mit Notfunktion, der doppeltwirkende (D) dient der EIN/AUS-Ansteuerung. Dieses Set enthält den Antrieb AP 40 (doppeltwirkend).

Woraus besteht die Klappe und für welche Bedingungen ist sie gedacht?
Das Gehäuse besteht aus Gusseisen, die Scheibe aus vernickeltem Gusseisen, die Dichtung aus EPDM und der O-Ring aus FKM. Der max. Betriebsdruck beträgt PN 16, die Temperatur -10 bis +120 °C.

Woraus besteht das Set?
Laut Datenblatt besteht das Set aus der Zwischenflansch-Absperrklappe BRA.J9.100 DN 32 und dem pneumatischen Antrieb AP 40. Die Datenblätter von Klappe und Antrieb werden separat geführt.

Zusätzliche Parameter

Kategorie: BRA.J9.100 Absperrklappen WAFER J9 - Scheibe Gusseisen vernickelt
Garantie: 2 Jahre
Artikelnummer: J9.100.032D16
Hersteller: IVAR
Typ: BRA.J9.100 + AP
Nennweite: DN 32
Antrieb: AP 40
Antriebsfunktion: doppeltwirkend
Max. Druck: PN 16
Temperaturbereich: -10 °C … +120 °C
Gehäusematerial: Gusseisen
Klappenscheibe: vernickeltes Gusseisen
Dichtung: EPDM; O-Ring FKM
Ansteuerung: ON / OFF

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.