Eshop roka 2025 s vykurovacou technikou

Abzweig PRESS - 20x16x20 IVAR.PT 5728

Artikelnummer: 512082
Nicht bewertet Bewertungsdetails
68,02 € –19 %
Vykurovacia technika Odbočovací kus PRESS - 20x16x20
68,02 € –19 % 54,42 € / St 44,24 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager (5 St)

Detaillierte Informationen

Produktdetailbeschreibung

Abzweig Press, IVAR.PT 5728, Maße: 20 x 16 x 20, Verpackung: 1 in Beutel / 12 in Karton

 

  • PN 10, T = +120 °C
  • zum Anschluss von ALPEX-Rohren unterschiedlicher Durchmesser, zum Anschluss von Heizkörpern
  • Abstand der Anschlüsse 40 mm
  • Material nickelfreier Messing CW617N, Halterung Edelstahl, Dichtung EPDM

Häufig gestellte Fragen

  • Welches Werkzeug benötige ich zur Montage dieses Fittings? Press-Fittings erfordern spezialisierte Presszangen mit der richtigen Zangentyp (häufig als B, F oder TH bezeichnet nach System) entsprechend der Maße und des Typs des Fittings - ohne das richtige Werkzeug kann die Verbindung nicht hergestellt oder überprüft werden.
  • Wie erkenne ich, dass die Verbindung korrekt gepresst wurde? Hochwertige Press-Fittings haben einen Presseindikator (z. B. Dichtungsring, der bei unvollständiger Pressung durchläuft) - vor dem Einbetten in die Wand oder den Estrich ist immer ein Drucktest des gesamten Systems durchzuführen.
  • Kann die Verbindung nach dem Pressen gelöst werden? Nein, im Gegensatz zum verschraubten (gewindeten) Anschluss ist die Pressverbindung dauerhaft und erfordert zum Trennen das Abschneiden des Fittings und das Austauschen durch ein neues.
  • Muss die Montage von einem Fachmann durchgeführt werden? Ja, das Pressen der Fittings erfordert fachmännische Fertigkeiten und korrekt kalibriertes Werkzeug - wir empfehlen, die Arbeit einem Heizungsbauer/Installateur zu überlassen, insbesondere bei Verbindungen, die in die Wand oder in den Estrich eingebettet werden, ohne Möglichkeit einer späteren Kontrolle.

Zusätzliche Parameter

Kategorie: Abzweigstücke press
Garantie: 2 Jahre
Gewicht: 0.365 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 03.06.2026 13:15:07

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

K Avatar des Autors 31.10.2026 19:58
Imam alpex cijev 16mm na ogranku za radijator, a glavni vod je 20mm - odgovara li mi ovaj odbočak s tim razmakom izlaza od 40mm za standardni priključak grijaćeg tijela, ili trebam drugu konfiguraciju?
A Avatar des Autors 31.10.2026 19:58
Da, ovaj odbočak 20x16x20 je upravo napravljen za tu kombinaciju - glavni vod 20mm, ogranak 16mm za priključak radijatora, s razmakom izlaza 40mm koji je standardan za većinu grijaćih tijela. Materijal je niklovana bakra CW617N s EPDM brtvom, radni tlak PN 10 i do 120°C, tako da za klasičnu radijatorsku instalaciju nema problema. Samo pazi da za montažu koristiš odgovarajuću press pritiskalicu s pravim čeljustima, inače spoj neće biti ispravno zaliven.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.