Eshop roka 2025 s vykurovacou technikou

OPTIMA Chromrohr mit Cu 15 mm; Chrom IVAR.DF 01

Artikelnummer: 530014CHROM
Nicht bewertet Bewertungsdetails
5,95 € –20 %
Vykurovacia technika Zverné šróbenie OPTIMA - Cu 15mm; chróm
5,95 € –20 % 4,76 € / St 3,87 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager (8 St)

Detaillierte Informationen

Produktdetailbeschreibung

Ziervenverschraubung OPTIMA, IVAR.DF 01, Maß: Cu 15 mm, Chrom

 

  • PN 10, T = +100 °C
  • für Armaturen OPTIMA
  • Anschlussmaß M 24
  • Material Messing CW617N mit Oberflächenausführung
  • IVAR.DF 01 - Kupferrohr Cu
  • Anzugsmoment für IVAR.DF 01 = 30 - 40 Nm 

Häufig gestellte Fragen

  • Wie wähle ich die richtige Art und Größe der Armatur/Ventil? Orientieren Sie sich an dem angegebenen Nenndruck (PN) und der Betriebstemperatur (T) in den technischen Daten - diese müssen den tatsächlichen Betriebsbedingungen Ihres Systems entsprechen oder übersteigen, und die Anschlussgröße muss dem Rohrdurchmesser entsprechen.
  • Wie funktioniert diese Armatur/Ventil? Der genaue Funktionsmechanismus (Abschließen, Druckregelung, Rücklaufverhinderung usw.) hängt vom konkreten Typ ab - eine detaillierte Funktionsbeschreibung finden Sie weiter oben bei diesem Produkt.
  • Muss die Montage von einem Fachmann durchgeführt werden? Bei einfacheren Schließarmaturen ist eine Montage durch den Heimwerker möglich, bei Regel- und Sicherheitsarmaturen (Sicherheitsventile, Druckminderer) empfehlen wir immer einen Fachmann, da es sich hierbei um Sicherheitselemente handelt.

Zusätzliche Parameter

Kategorie: Zubehör OPTIMA
Garantie: 2 Jahre
Gewicht: 0.037 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:05:31

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

R Avatar des Autors 19.11.2026 11:16
Ahoj, máme doma měděný potrubí 15 mm a chceme na něj napojit baterii OPTIMA - sedí tohle šroubení přímo na Cu trubku bez nějaký redukce? A jak moc to musí být utažený, nechci to přetáhnout a prasknout.
A Avatar des Autors 19.11.2026 11:16
Ahoj, jasně, tohle šroubení je přesně pro měděné potrubí 15 mm, takže redukci řešit nemusíš. Utahovací moment je 30-40 Nm, takže ideálně použij momentový klíč, ať to sedí přesně a nic nepoškodíš. Materiál je mosaz s chromovaným povrchem, zvládne tlak PN 10 a teplotu do 100 °C, takže na běžný provoz k armaturám OPTIMA je to v pohodě.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.