Flansch-Rückschlagventil mit Feder IVAR BRA.F5.000 – DN 250, L = 370 mm
Artikelnummer: F5000250Produktdetailbeschreibung
Einsatz
Das Ventil wird in Heizwerken, Klimaanlagen, Fernwärme, in der Wasserverteilung und -aufbereitung, in Industrie und Landwirtschaft, in Druckluftnetzen, Brandschutzsystemen sowie für Öle und Kohlenwasserstoffe eingesetzt. Für Dampf und gefährliche Gase ist es laut Datenblatt nicht vorgesehen.
Eigenschaften
- Gehäuse aus Grauguss EN GJL 250, Feder aus Edelstahl AISI 304, NBR-Dichtung
- Flansche nach EN 1092 / ISO 7005, max. Druck für Wasser 16 bar, Temperatur mit NBR -10 bis +100 °C
- Gehäuse- und Scheibenform begrenzen Turbulenzen und Druckverluste, DN 250: Kv 1620 m³/h, Gewicht 81,4 kg
- für DN 250 gilt bei ungefährlichen Gasen ein max. Druck von 14 bar
Montage und Betrieb
Dank der Feder ist der Einbau senkrecht wie waagerecht möglich, das Ventil kann auch als Fußventil dienen. Für Dampf ist es nicht geeignet und darf nicht im Sättigungsbereich Flüssigkeit–Dampf eingesetzt werden. Die Montage sollte ein Fachbetrieb übernehmen.
Technische Daten
| Artikelnummer | F5000250 |
| Hersteller | IVAR |
| Typ | BRA.F5.000 |
| Nennweite | DN 250 |
| Baulänge | 370 mm |
| Max. Druck | 16 bar (Wasser) |
| Temperaturbereich | -10 °C … +100 °C (NBR) |
| Flansche | EN 1092 / ISO 7005 |
| Gehäusematerial | Grauguss |
| Dichtung | NBR |
| Kv | 1620 m³/h |
| Gewicht | 81,4 kg |
| Einbau | waagerecht und senkrecht |
Häufige Fragen
In welcher Lage kann das Ventil BRA.F5.000 eingebaut werden?
Waagerecht wie senkrecht, da die Edelstahlfeder den Schluss sicherstellt. Es lässt sich auch als Fußventil verwenden.
Eignet sich das Ventil auch für Dampf?
Nein, die Baureihe BRA.F5.000 ist für Dampf nicht geeignet. Sie darf nicht verwendet werden, wenn Temperatur und Druck im Sättigungsbereich Flüssigkeit–Dampf liegen.
Ist das Ventil für Trinkwasser geeignet?
Das Datenblatt nennt eine Trinkwasserzulassung. Für Wasser beträgt der maximale Druck 16 bar.
Zusätzliche Parameter
| Kategorie: | BRA.F5.000 - Rückschlagventile mit Flansch |
|---|---|
| Garantie: | 2 Jahre |
| Gewicht: | 81.4 kg |
| Artikelnummer: | F5000250 |
| Hersteller: | IVAR |
| Typ: | BRA.F5.000 |
| Nennweite: | DN 250 |
| Baulänge: | 370 mm |
| Max. Druck: | 16 bar (Wasser) |
| Temperaturbereich: | -10 °C … +100 °C (NBR) |
| Flansche: | EN 1092 / ISO 7005 |
| Gehäusematerial: | Grauguss |
| Dichtung: | NBR |
| Kv: | 1620 m³/h |
| Gewicht: | 81,4 kg |
| Einbau: | waagerecht und senkrecht |
Produktbewertung
Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!
Diskussion
Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
„Made in Italy“ adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
