Eshop roka 2025 s vykurovacou technikou

Gummikompensator mit Flansch - Serie F8 - DN 80; L=116 mm; NBR BRA.F8.100

Artikelnummer: F8100080
Nicht bewertet Bewertungsdetails
162,36 € –20 %
Vykurovacia technika Prírubový gumový kompenzátor- séria F8 - DN 80; L=116mm; NBR
162,36 € –20 % 129,89 € / St 105,60 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager beim Lieferanten

Detaillierte Informationen

Produktdetailbeschreibung

Gummikompensator - flansiert, BRA.F8.100, Maße: DN 80, Länge: 116 mm

 

  • max. Druck 16 bar, Flans PN 16 gemäß STN EN 1092-1
  • T = -10 °C bis max. +80 °C
  • für Heizung und Klimaanlage (HVAC), Wasserleitungen, Druckluft
  • Material - Flans: gezinkter Stahl, elastischer Element: NBR verstärkt mit Nylon
  • Einsatz für Wasser mit bis zu 50 % Glykol
  • Es ist unbedingt notwendig, die Werte der Verkürzung/Vorverlängerung gemäß den Vorgaben des Herstellers einzuhalten – siehe Tabelle im technischen Datenblatt

Häufig gestellte Fragen

  • Wie wähle ich die richtige Art und Größe der Armatur/Ventil? Orientieren Sie sich am Nenndruck (PN) und der Betriebstemperatur (T), wie in den technischen Parametern angegeben – diese müssen den tatsächlichen Betriebsbedingungen Ihres Systems entsprechen oder diese übertreffen, und die Anschlussgröße muss der Rohrdurchmesser entsprechen.
  • Wie funktioniert diese Armatur/Ventil? Der genaue Funktionsmechanismus (Dichtung, Druckregelung, Rücklauf und Co.) hängt vom konkreten Typ ab – eine detaillierte Beschreibung der Funktion finden Sie oben bei diesem Produkt.
  • Muss die Montage von einem Fachmann durchgeführt werden? Bei einfacheren Schließarmaturen kann die Montage auch vom Heimwerker übernommen werden, bei Regel- und Sicherheitsarmaturen (Sicherheitsventile, Druckminderer) empfehlen wir stets einen Fachmann, da es sich um Bauteile mit Sicherheitsfunktion handelt.

Zusätzliche Parameter

Kategorie: BRA.F8.100 - Gummikompensator - Elastomer aus NBR
Garantie: 2 Jahre
Gewicht: 6.093 kg
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:08:02

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

M Avatar des Autors 01.11.2026 19:30
Poštovani, imam sustav grijanja s dodatkom glikola za zaštitu od smrzavanja - može li ovaj kompenzator podnijeti takav medij, i do kojeg postotka glikola je testiran?
A Avatar des Autors 01.11.2026 19:30
Može, ovaj F8 kompenzator s NBR elastičnim elementom predviđen je za uporabu s vodom koja sadrži do 50% glikola, tako da vaš sustav spada u predviđene uvjete rada. Samo obratite pažnju da radna temperatura ne prelazi +80°C i tlak 16 bar, te obavezno pogledajte tablicu skraćivanja/produživanja u tehničkom listu prije montaže. Ako trebate i druge dimenzije iz F8 serije za usporedbu, pogledajte ostatak te kategorije.
H Avatar des Autors 10.10.2026 18:10
Hejsan, jag har ett rör som heter DN 80 och undrar om denna gummikompensator passar till det? Jag vill använda den i min värmepump för vatten men är lite osäker på om temperaturen blir för hög eller om materialet håller.
A Avatar des Autors 10.10.2026 18:10
Hej Hugo! Ja, denna modell är exakt gjord för rörstorleken DN 80 och klarar temperaturer upp till +80 grader, vilket passar bra för din värmepump. Materialet tål också vatten med glykol och flänsarna sitter fast i galvaniserat stål så de håller tätt. Kolla bara att ditt system inte går över 16 bar tryck så är allt rätt.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.