Eshop roka 2025 s vykurovacou technikou

Stopfen - für Wandhalterungen - 1/2"; blau; Kunststoff IVAR.Z01

Artikelnummer: 513015
Nicht bewertet Bewertungsdetails
1,14 € –20 %
Vykurovacia technika Zátka - pre nástenky - 1/2"; modrá; plast
1,14 € –20 % 0,91 € / St 0,74 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager (38 St)

Detaillierte Informationen

Produktdetailbeschreibung

  • Montagestopfen zum Verstellen von Messing-Wandarmaturen 1/2“
  • Material Kunststoff, Dichtung O-Ring EPDM

Häufig gestellte Fragen

  • Welches Werkzeug benötige ich zur Montage dieses Fittings? Press-Fittings erfordern spezialisierte Presszangen mit der richtigen Zangentyp (häufig als B, F oder TH bezeichnet nach System) entsprechend der Größe und Art des Fittings – ohne das richtige Werkzeug kann die Verbindung nicht hergestellt oder überprüft werden.
  • Wie erkenne ich, dass die Verbindung korrekt gepresst wurde? Qualitativ hochwertige Press-Fittings haben eine Presseindikation (z. B. Dichtungsring, der bei unvollständiger Presse überläuft) – vor dem Einbetten in die Wand oder den Estrich ist immer ein Drucktest des gesamten Systems durchzuführen.
  • Kann die Verbindung nach dem Pressen getrennt werden? Nein, im Gegensatz zum schraubbaren (drehbaren) Anschluss ist die gepresste Verbindung dauerhaft und erfordert zum Trennen das Abschneiden des Fittings und das Austauschen durch ein neues.
  • Muss die Montage durch einen Fachmann erfolgen? Ja, das Pressen der Fittings erfordert fachmännische Fertigkeiten und korrekt kalibriertes Werkzeug – wir empfehlen, die Arbeit einem Heizungsbauer/Sanitärinstallateur zu überlassen, insbesondere bei Verbindungen, die in die Wand oder in den Estrich eingebettet werden, ohne Möglichkeit einer späteren Kontrolle.

Zusätzliche Parameter

Kategorie: Stopfen für Wandwinkel
Garantie: 2 Jahre
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:04:29

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

B Avatar des Autors 03.11.2026 21:55
Molim vas, može li se ova zatvorna pločica od plastike s O-krugom EPDM koristiti za trajno zaslepljenje spoja na zališanom cijevnom sustavu, ili je namijenjena samo privremenom rješenju?
A Avatar des Autors 03.11.2026 21:55
Da, ovaj proizvod je dizajniran kao trajna montažna zatvorna pločica koja se koristi za trajno zaslepljenje spojeva. Materijal i EPDM O-krug osiguravaju da spoj ostane hermetički zatvoren nakon pravilnog zalijevanja, no važno je znati da takav spoj više ne može biti rastavljen bez zamjene cijelog fitinga. Za ovakve radove preporučujemo angažiranje stručnjaka koji će izvršiti tlaknu provjeru prije zalijevanja u zid.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.