Eshop roka 2025 s vykurovacou technikou

Übergang von Außengewinde zu Innengewinde – 1/2"x1/2" IVAR.1551 G

Artikelnummer: 1551G000404
Nicht bewertet Bewertungsdetails
2,52 € –19 %
Vykurovacia technika Prechod vonkajší - vnútorný závit - 1/2"x1/2"
2,52 € –19 % 2,02 € / St 1,64 € ohne MwSt. Grundpreis:
Internationale Zustellung
auf Lager beim Lieferanten

Detaillierte Informationen

Produktdetailbeschreibung

Übergang Außengewinde- Innengewinde, IVAR.1551 G, Maß: 1/2" x 1/2", Verpackung: 20 Stk. in Beutel / 320 Stk. in Karton 

 

Häufig gestellte Fragen

  • Wie wählt man die richtige Fittings-Größe aus? Der Gewinde- Durchmesser muss exakt mit dem Gewinde auf der Rohrleitung oder Armatur übereinstimmen, an die der Fitting angeschlossen wird – die Abkürzungen FF (Innengewinde-Innengewinde) und MF (Außengewinde-Innengewinde) im Namen zeigen den Gewindetyp an den einzelnen Seiten an.
  • Ist Dichtungs-Material bei der Montage erforderlich? Ja, bei Schraubverbindungen wird standardmäßig Teflonband oder Hanf mit Dichtmasse verwendet, um die perfekte Dichtheit der Verbindung zu gewährleisten.
  • Muss die Montage von einem Fachmann durchgeführt werden? Eine einfache Schraubverbindung kann bei grundlegender Fertigkeit auch vom Heimwerker übernommen werden, bei Eingriffen in einen bereits funktionierenden Leitungsverlauf (insbesondere bei Gas) empfehlen wir, einen Installateur hinzuzuziehen, der gleichzeitig die Dichtheit der Verbindung überprüft.

Zusätzliche Parameter

Kategorie: Außen- zu Innengewinde-Übergänge
Garantie: 2 Jahre
Gewicht: 0.038 kg
Fittingart: Übergangsstück / Übergang
Gewindegröße: 1/2"
Anschlussart: Innen- × Außengewinde
Verfügbarkeit: Auf Lager oder beim Lieferanten
Letzte Preisaktualisierung: 13.04.2026 1:05:08

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

J Avatar des Autors 18.11.2026 20:09
Dobrý den, chtěl bych se zeptat, zda je tento mosazný přechod 1/2"x1/2" vhodný i na rozvod pitné vody v bytě, a jaký materiál je potřeba použít k utěsnění závitového spoje při montáži.
A Avatar des Autors 18.11.2026 20:09
Dobrý den, ano, tento přechod má atest na pitnou vodu (RÚVZ Poprad), takže je pro tento účel v pořádku. Na utěsnění závitu stačí běžná teflonová páska nebo konopné vlákno s těsnící pastou, jak se standardně používá u závitových spojů.
M Avatar des Autors 23.10.2026 10:38
Lep pozdrav, ali je ta prehod primeren za vgradnjo na obstoječo napeljavo tople sanitarne vode, glede na to, da je navedena maksimalna temperatura 120°C? Zanima me tudi, ali je potrebno pri montaži uporabiti teflonski trak ali je dovolj samo konopno vlakno s pasto.
A Avatar des Autors 23.10.2026 10:38
Lep pozdrav, ja, ta prehod zdrži do 120°C, tako da je za toplo sanitarno vodo brez težav primeren. Za tesnjenje lahko uporabite eno ali drugo - torej teflonsko folijo ali konopno vlakno s tesnilno pasto, oboje standardno deluje za navojne spoje. Fiting je iz medenine CW617N in ima atest za pitno vodo, tako da je za to uporabo ustrezen.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.