Eshop roka 2025 s vykurovacou technikou

Kupplung PUSH-PPSU - 26x26 IVAR.PUSH-V

Artikelnummer: 88326100
Nicht bewertet Bewertungsdetails
20,17 € –19 %
Vykurovacia technika Vsuvka PUSH-PPSU - 26x26
20,17 € –19 % 16,14 € / St 13,12 € ohne MwSt. Grundpreis:
Internationale Zustellung
Auf Bestellung (1-2 Wochen)

Detaillierte Informationen

Produktdetailbeschreibung

Steckverbindung push - PPSU, IVAR.PUSH - V, Maße: 26 x 26, Verpackung: 5 Stk 

 

  • PN 10, T = +120 °C
  • für einfache Anschlussverbindung von gleichdickem ALPEX-Rohr ohne Verwendung von Presswerkzeug
  • Material Kunststoff PPSU, Halterung Edelstahl, Dichtung EPDM

Häufig gestellte Fragen

  • Welches Werkzeug benötige ich für die Montage dieses Fittings? Press-Fittings erfordern spezialisierte Presszangen mit der richtigen Zahnform (meist als B, F oder TH bezeichnet nach System) entsprechend der Maße und des Typs des Fittings – ohne korrektes Werkzeug kann die Verbindung nicht hergestellt oder überprüft werden.
  • Wie erkenne ich, dass die Verbindung korrekt gepresst wurde? Qualitativ hochwertige Press-Fittings besitzen einen Presseindikator (z. B. ein Dichtungsring, der bei unvollständiger Presse überläuft) – vor dem Einbetten in die Wand oder den Estrich ist immer ein Drucktest des gesamten Systems durchzuführen.
  • Kann die Verbindung nach dem Pressen getrennt werden? Nein, im Gegensatz zum verschraubten (gewundenen) Anschluss ist die gepresste Verbindung dauerhaft und erfordert zum Trennen das Abschneiden des Fittings und das Austauschen durch ein neues.
  • Muss die Montage von einem Fachmann durchgeführt werden? Ja, das Pressen der Fittings erfordert fachmännische Fertigkeiten und korrekt kalibriertes Werkzeug – wir empfehlen, die Arbeit einem Heizungsbauer/Sanitärmeister zu überlassen, insbesondere bei Verbindungen, die in die Wand oder in den Estrich eingebettet werden und nachher nicht mehr kontrollierbar sind.

Zusätzliche Parameter

Kategorie: PUSH-Kupplungen gerade, reduziert - PPSU
Garantie: 2 Jahre
Gewicht: 0.05 kg
EAN: 4013960371079
Material: Kunststoff PPSU
Betriebstemperatur: +120 °C
Fittingart: Nippel
Rohrdurchmesser: 26 mm
Material: Kunststoff
Anschlussart: Steckverbindung (Push)
Nennlast: PN 10
Letzte Preisaktualisierung: 03.05.2026 1:58:46

Produktbewertung

Seien Sie der Erste, der einen Beitrag zu diesem Artikel schreibt!

Dieses Feld nicht ausfüllen

Wie würden Sie dieses Produkt bewerten? Wählen Sie 1 bis 5 Sterne, wobei 1 die schlechteste und 5 die beste Bewertung ist.

Diskussion

Dieses Feld nicht ausfüllen

Diskussionsübersicht

G Avatar des Autors 09.11.2026 13:57
Rabim ta push fiting za 26mm Alpex cev, pa me zanima, ali je spoj potem res trajen oz. ali ga lahko kdaj kasneje razstavim, če bo treba kaj popraviti? Pa ali za montažo rabim kakšno posebno orodje ali gre samo na potisk?
A Avatar des Autors 09.11.2026 13:57
Push vstavek deluje točno tako kot pove ime - cev enostavno potisneš v fiting, brez stiskalnega orodja, tako da za montažo ne rabiš nobene stiskalnice. Glede razstavljanja pa gre za trajen spoj, torej ga kasneje ne moreš odstraniti in ponovno uporabiti - če bi bilo treba kaj spremeniti, se mora cev prerezati in vstaviti nov fiting. Je pa prav zato priporočljivo, da montažo izvede nekdo, ki se s tem spozna, še posebej če bo spoj zalit v steno ali estrih.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all „Made in Italy“.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

„Made in Italy“ adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all „Made in Italy“.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.